Video Menu - Sony SRR1000 Operation Manual

VIDEO Menu

The VIDEO menu allows you to adjust video signals.
Button Indication
[F1] MASTER
[F2]
Y
[F3] PB
[F4]
PR
[F5]
SETUP
[F6]
BLK LV
[F7]
CRM PH
[F8] SYNC PHASE
[F8] SYNC
[F9] FINE
[F10] EXIT
[F10]
INT SG
ALT/[F1] OUT BLNK
ALT/[F3] YADD
ALT/[F5] A/B DISP
ALT/[F6] VPID SEL
46
Detailed Menu Description
Setting
Simultaneously adjusts the Y, PB, and PR levels of the HD video signal output via
the SD/HD SDI OUT connectors. (see page 40)
0.0 to 100% (4000H) to 141.3% (5A70H)
Adjusts the Y level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H) to 141.3% (5A70H)
Adjusts the Pb level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H) to 141.3% (5A70H)
Adjusts the Pr level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
0.0 to 100% (4000H) to 141.3% (5A70H)
Adjusts the setup level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–10% to 0.0% to 10.0%
Adjusts the black level of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–31.0% to 0% to 31.0%
Adjusts the chroma phase of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
–127 to 0 to 127
Adjusts the sync phase of the HD video signal output via the SD/HD SDI OUT
connectors. (see page 40)
Roughly adjusts the sync phase.
–128 to 0 to 127
Finely adjusts the sync phase.
0 to 1024
Redisplays the previous menu.
Sets the type of signal output from the internal signal generator.
Off
CB100
CB75
SMPTE
ARIB
MB1
MB2
10STEP
PBAR
RAMP
Black
Turns on or off vertical interval blanking processing of the HD video signals output
via the SD/HD SDI OUT connectors.
Through: Does not perform blanking processing.
Blank: Performs blanking processing.
Sets whether to forcibly turn off Y add.
Auto
Off
Sets whether to display the video for the left or right when displaying 3D video
signals on the display.
Link-A
Link-B
MONI: (Only available for the output ports)
Selects VPID to be multiplexed with the HD SDI output in 3D mode.
Dual: Uses as two separate sets of signals.
3D: Uses as 3D signals.
Target
Out
Out
Out
Out
Out
Out
Out
Out
Out
Out
–
In
Out
Out
I/O
Out