Sony SRR1000 Operation Manual page 19

C Analog output/power supply section
a AUDIO MONITOR OUTPUT connectors
Output the audio monitor signals.
b Main power switch
Turns on/off the main power supply. When the main power
is turned on, the On/Standby indicator on the control panel
lights.
Normally, this switch should be left in the top (on) position
during operation, and standby status switching should be
performed using the On/Standby button on the control
panel.
Note
When turning off the main power supply, always make
sure that the On/Standby indicator on the front panel is lit
red (standby state) before turning off the switch.
c - AC IN connector
Connect this connector to an AC outlet using the
recommended power cord.
d U Ground terminal
If necessary, use this for grounding.
19
Connector Panel