Recording/Playback; To Check The Remaining Battery (Battery Info); To Use Special Effects; To Initialize The Settings - Sony DCR-HC19E Service Manual

Functions used for recording/playback, etc. (continued)
9
0
6

Recording/playback

To check the remaining battery
(Battery Info) .......................... 
Set the POWER switch up to OFF (CHG),
then press DISP/BATT INFO . The
battery information appears for about 7
seconds. Keep the button pressed to view it
for about 20 seconds.
Remaining battery (approx.)
Recording capacity (approx.)
26
To turn off the operation confirmation
beep .................................... 
See [BEEP] (p. 56) to set the operation
beep.
To use special effects ................
See (PICT.APPLI.) menu (p. 48).
qa
To initialize the settings ............. 
3
Press RESET  to initialize all the
qs
settings, including the setting of the date
and time.
(Menu items customized on Personal Menu
are not initialized.)
qd

Other part names and functions

Speaker

Sounds come out from the speaker.
For how to adjust the volume, see page 23.
•
REC lamp

The REC lamp lights up in red during
recording (p. 55).
Remote sensor

Point the Remote Commander (p. 32)
towards the remote sensor to operate
your camcorder.
Internal stereo microphone

For DCR-HC42:
When an external microphone is
connected, the audio input from the
external microphone takes precedence
over others.