Secure Device Card (Windows Ce 5.0 Only) - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

Secure Device Card (Windows CE 5.0 Only)

NOTE SD Card is not supported on WIndows Mobile 6.1 devices.
The Secure Device (SD) card provides secondary non-volatile storage (the flash memory is slower than RAM). The
SD card holder is located under the battery.
CAUTION Follow proper Electro-Static Discharge (ESD) precautions to avoid damaging the SD card. Proper ESD
precautions include, but are not limited to, working on an ESD mat and ensuring that the operator is
properly grounded.
Do not use the SD card slot for any other accessories.
NOTE Select SD cards with environmental and/or the write cycle performance specifications that meet or exceed the
application requirements.
2GB SD Memory Cards are supported on MC3000 with OEM Version 05.26.0000 and higher.
To insert the SD card:
Remove the battery (see Main Battery Removal on page 1-13).
1.
Lift the SD card retaining door.
2.
Position the SD card, with the contacts down, into the SD card slot. The SD card corner notch fits into the slot
3.
only one way.
Snap the retaining door closed.
4.
SD Card Retaining Door
Inserting the SD card
Figure 2-23
Replace the battery (see Install Main Battery on page 1-6).
5.
SD Card
Accessories 2 - 23