Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual page 144

6 - 22 MC3000 Integrator Guide
Static IP Address Entry Dialog Box
Figure 6-28
Static IP Address Entry Fields
Table 6-14
Field
IP Address
Subnet Mask
Select the
Advanced
If the check box is selected then tapping
Advanced
the Gateway, DNS, and WINS address. If the
dialog box.
Transmit Power
Advanced Address Entry Dialog Box
Figure 6-29
The IP information that is entered in the profile is only used when the
>
Options System Options
the IP information in the profile is ignored and the IP information entered in the Microsoft interface applies.
The Internet is a collection of networks with users that communicate with each other. Each
communication carries the address of the source and destination networks and the particular
machine within the network associated with the user or host computer at each end. This
address is called the IP address (Internet Protocol address). Each node on the IP network must
be assigned a unique IP address that is made up of a network identifier and a host identifier.
Enter the IP address as a dotted-decimal notation with the decimal value of each octet
separated by a period, for example, 192.168.7.27.
Most TCP/IP networks use subnets in order to effectively manage routed IP addresses. Having
an organization's network divided into subnets allows it to be connected to the Internet with a
single shared network address, for example, 255.255.255.0.
check box to enter additional address information.
Advanced
dialog box (System Options on page 6-38). When
Description
displays the
Next Advanced Address Entry
check box is not selected then tapping
Enable IP Mgmt
Enable IP Mgmt
dialog box to enter
displays the
Next
check box is enabled in the
check box is disabled,