Connect To A Bluetooth Device - Motorola ET1N0 Quick Start Manual

Connect to a Bluetooth Device

To enable Bluetooth:
Touch > Settings > Wireless & networks.
1.
Touch the Bluetooth checkbox. A green check appears in the
2.
checkbox and the Bluetooth icon appears in the Status bar
indicating that Bluetooth is enabled.
Under Bluetooth settings, touch Scan for devices. The ET1
3.
begins searching for discoverable Bluetooth devices in the
area and lists them under Bluetooth devices.
Scroll through the list and select a device. The Bluetooth
4.
pairing request dialog box appears.
Enter a PIN and touch OK.
5.
6. Touch .
Refer to the ET1 Enterprise Tablet User Guide for
NOTE
supported Bluetooth profiles.
Connect to a WLAN Network
To set up a WLAN network:
Touch > Settings > Wireless & networks.
1.
Touch the Wi-Fi checkbox to turn on Wi-Fi. A green check
2.
appears in the checkbox and the Wi-Fi icon appears in the
Status Bar indicating that Wi-Fi is enabled.
Touch Wi-Fi settings. The ET1 searches for WLANs in the
3.
area and lists them under Wi-Fi networks.
4. Select the desired network.
5. For open networks, touch Connect. For secure networks
enter the required password or other credentials then touch
Connect. See the system administrator for more information.
6. Touch .
9