Four Slot Ethernet Cradle; Setup; Ethernet Cradle Drivers (Windows Ce 5.0) - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

2 - 8 MC3000 Integrator Guide

Four Slot Ethernet Cradle

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-1.
This section describes how to set up and use a Four Slot Ethernet cradle with the mobile computer.
The Four Slot Ethernet cradle:
•
Provides 5.4 VDC power for operating the mobile computer.
•
Connects the mobile computer (up to four) to an Ethernet network.
You cannot ActiveSync using the Four Slot Ethernet cradle. To ActiveSync with a host computer, use the SIngle
Slot Serial/USB cradle.
CAUTION Use only a Motorola approved power supply output rated 12 VDC and minimum 9 A. Use of an alternative
power supply will void the product warranty and may cause product damage. See the MC3000 User Guide
for the power supply regulatory compliance statement.

Setup

Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or a port on the host device. Connect the Ethernet
cradle (power port) to a Motorola approved power supply.
Ethernet Switch
Connection
Four Slot Ethernet Cradle Connection
Figure 2-5

Ethernet Cradle Drivers (Windows CE 5.0)

The Ethernet cradle drivers are pre-installed on the MC3000 and initiate automatically when the MC3000 is placed
in a properly connected Four Slot Ethernet cradle.
When the mobile computer is inserted into the Four Slot Ethernet cradle, the LAN icon indicates that the mobile
computer is connected to a network.
Power Port
Ethernet Port 1