Strap/Door Assembly Removal And Replacement - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

Strap/Door Assembly Removal and Replacement

The Strap/Door Assembly consists of a hand strap and the battery door. There are two versions of this assembly,
one for the Standard Battery and one for the Extended Life Battery. Before removing the Strap/Door Assembly,
press the red
Power
To remove the Strap/Door Assembly:
Rotate the latches to the open position.
1.
CAUTION Do not lift up on the latches when removing the Strap/Door Assembly. Lift up on the hand strap only.
Lift the hand strap to lift the Strap/Door Assembly off, bottom first.
2.
Use a #00 Phillips screwdriver to remove the screws.
3.
Lift the mounting clip.
4.
Slide the mounting clip out of the strap loop.
5.
Reverse the procedure to replace the Strap/Door Assembly.
Latches
#00 Phillips
Screwdriver
Screws
Strap/Door Removal and Replacement
Figure 1-12
button to turn off the screen and set the mobile computer to suspend mode.
Strap/Door
Assembly
Strap Loop
Mounting
Clip
Getting Started 1 - 15
Hand Strap
Mounting
Clip