Setup; Battery Charging; Led Charge Indications; Communication Setup - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

Setup

The MC3000 Communication/Charge cables can connect with a serial/USB device, such as a printer or host
computer, through its serial or USB port.
Power Input
MC3000 Connector
Power Input
MC3000 Communication/Charge Cables
Figure 2-19

Battery Charging

The MC3000 Communication/Charge cables can charge the mobile computer battery and supply operating power.
To charge the mobile computer battery:
Connect the MC3000 Communication/Charge cable power input connector to the Motorola approved power
1.
source.
Attach the bottom of the mobile computer to the MC3000 connector and gently press in until the snaps latch on
2.
the mobile computer.
The mobile computer amber Charge LED Indicator indicates the mobile computer battery charging status. The
3.
Standard Battery usually charges in less than four hours and the Extended Life Battery usually charges in less
than six hours. See
When charging is complete, remove the cable by gently pulling the mobile computer and the cable apart until
4.
the snaps release the mobile computer.

LED Charge Indications

The MC3000 Communication/Charge cables use the amber Charge LED Indicator to indicate the MC3000 battery
charging status. See Table 2-1 on page 2-5

Communication Setup

To connect the MC3000 Communication/Charge cables to a serial or USB device:
Connect serial/USB end of the MC3000 Communication/Charge cable into the communications port.
1.
Connect the MC3000 connector end to the MC3000 Communication/Charge cable to the mobile computer. For
2.
more information on communications setup procedures, see USB Connection Setup on page 2-34 and/or
Serial Communication Setup on page 2-30.
Connector
Barrel
Connector
Table 2-1 on page 2-5 for charging status indications.
for charging status indications.
Serial (RS232)
Cable
Top View
USB Host Cable
Mini-B Connector
USB Client Cable
Standard-A
Connector
Accessories 2 - 19