Single Slot Serial/Usb Cradle - Motorola MC3000R - Win CE 5.0 Core 312 MHz Integration Manual

2 - 2 MC3000 Integrator Guide

Single Slot Serial/USB Cradle

CAUTION Ensure that you follow the guidelines for battery safety described in Battery Safety Guidelines on page 8-1.
This section describes how to set up and use the Single Slot Serial/USB cradle. For cradle setup, see
For communications setup procedures, see USB Connection Setup on page 2-34 and/or Serial Communication
Setup on page 2-30.
The Single Slot Serial/USB cradle:
•
Provides 5.4VDC power for operating the mobile computer, charging the battery and charging a spare
battery.
•
Provides a serial port and a USB port (mini AB receptacle) for data communication between the mobile
computer and a host computer or other serial devices (e.g., a printer).
•
Synchronizes information between the mobile computer and a host computer. With customized or third party
software, it can also synchronize the mobile computer with corporate databases.
•
Provides serial connection through the serial pass-through port for communication with a serial device, such
as a host computer. For communication setup procedures, see Serial Communication Setup on page 2-30.
•
Provides USB connection through the USB pass-through port for communication with a USB device, such as
a host computer. For communication setup procedures, see USB Connection Setup on page 2-34.
CAUTION Use only a Motorola approved power supply output rated 12 VDC and minimum 3.3 A. Use of an
alternative power supply will void the product warranty and may cause product damage. See the
MC3000 User Guide for the power supply regulatory compliance statement.
Figure 2-2.