Sony BRC-H900 Operating Instructions Manual page 50

CAMERA button Maximum panning/tilting
6
7
Only the CAMERA button you pressed flashes, and
the corresponding maximum panning/tilting speed
is set.
Note
The maximum panning/tilting speed setting is stored in
the memory of the optional RM-BR300 Remote Control
Unit. If you use another RM-BR300 Remote Control
Unit or you connect another camera to the RM-BR300,
set a limit on the maximum panning/tilting speed again.
To face the camera back to the front
Press the button on the top of the joystick for one or two
seconds.
If you accidentally move the camera with
your hand
Press the PAN-TILT RESET button to perform the pan/
tilt reset action.
If the camera moves in a different
direction from that you intended
The camera is preset to face toward the right whenever
the joystick is inclined to the right. You might wish to
face the camera toward the opposite direction from that
in which you inclined the joystick, for example, when
you change the direction of the camera while checking
the picture on the screen. In such a case, press the
POSITION 2 (REV) button while holding down the L/R
DIRECTION button.
To reset the setting, press the POSITION 1 (STD) button
while holding down the L/R DIRECTION button.
50
GB
Pan/Tilt and Zoom Operation
speed
43 degrees/sec.
60 degrees/sec.
Press for 1 or 2 seconds.
Joystick Movement of the
camera
Incline to the right.
Incline to the right.
Note
The setting above only changes the signal emitted from
the RM-BR300 Remote Control Unit, and does not
change the setting of the camera itself.
If the STANDBY lamp of the camera
flashes
When the camera is moved or turned by hand or by
external shock, the microcomputer inside the camera
may not be able to memorize the pan/tilt position
properly.
To reset the pan/tilt position, press the PAN-TILT
RESET button.
STANDBY flashes.
Setting
While holding down
L/R
DIRECTION
1
9
STD
Press.
While holding down
L/R
DIRECTION
2
10
REV
Press.