Sony BRC-H900 Operating Instructions Manual page 79

Presetting item
DOWN
UP
RAMP CURVE
IR RECEIVE
2)
IMG FLIP
PAN REVERSE
TILT REVERSE
DISPLAY INFO
SYNC MASTER
HPHASE
HPHASE FINE
STEADY SHOT
COLOR BAR
TALLY MODE
FORMAT (HD OUTPUT)
ADD SYNC
SYNC TYPE
IMG SIZE (SD OUTPUT)
3)
SETUP (SD OUTPUT)
1)
The item is set to OFF automatically when the power
is turned off and on again even if the item is set to ON
while you preset.
2)
The current setting of IMG FLIP is recalled regardless
of presetting operations.
3)
The item cannot be stored for 1080/50i or 720/50p
output signal.
Presetting menu items while the Interface
Card is inserted into BRU-SF10
connected with the camera
Presetting item
Menu items displayed only when
the HFBK-SA1 is installed
DSUB OUTPUT 1
ADD SYNC
DSUB OUTPUT 2
1)
IMG SIZE
SETUP (not available for 50i
output signal)
Menu items displayed only when
the HFBK-HSD2 is installed
1)
IMG SIZE
Presetting position
number
1 2 – 16
f –
f –
f
–
f
–
f
–
f –
f –
f –
f –
f
–
f
–
f –
1)
–
f –
f –
f
–
f
–
f
–
f –
Presetting position
number
1 2 – 16
f –
f –
f –
f –
f
–
f
–
1)
When installed in the BRC-H900 and in use, the IMG
SIZE setting is linked with the VIDEO OUT setting.
When two BRBK-SA1 cards are installed in the BRU-
SF10, or when a BRBK-SA1 and BRBK-HSD2 are
used as SD-SDI, the IMG SIZE settings for both option
cards are linked. When two BRBK-HSD2 cards are
installed in the BRU-SF10, or when a BRBK-SA1 and
BRBK-HSD2 are used as SD-SDI, the IMG SIZE
settings for both option cards are linked.
: Setting items are stored in memory. When the power
z
is turned on, the camera starts with these settings.
a : Setting items are stored in memory. Recall the
settings by selecting the preset number.
s : Setting items are stored in memory. Because only
one memory is available for this item, the last preset
setting is stored regardless of the preset number, and
recalled when the power is turned on. This setting
cannot be reset. When the item setting is changed,
the new setting is applied, even if the preset is
recalled.
: Setting items are stored in memory. When the power
f
is turned on, the camera starts with these settings.
This setting cannot be reset by pressing the RESET
button. When the item setting is changed, the new
setting is applied, even if the preset is recalled.
– : Setting items are not stored.
79
GB
Presetting Items