Before Installation - Sony BRC-H900 Operating Instructions Manual

Before installation

After deciding the shooting direction, make the required
holes for the ceiling bracket (B) and connecting cables
on the ceiling or shelf, etc. For the dimensions of the
ceiling bracket (B), see page 82.
Notes
• The connecting cables cannot be passed through the
ceiling bracket (A). A hole for the wiring is required
through the surface on which the camera is to be
installed.
• Do not attach any object other than the camera to the
ceiling brackets.
• The ceiling bracket cannot be attached to a junction
box when installing the camera on a ceiling.
Installation on a ceiling (example)
1
Set IMG FLIP to ON in the SYSTEM menu.
2
Remove the four screws on the bottom of the
camera to remove the four feet.
3
Attach the ceiling bracket (A) to the bottom of the
camera using the supplied four screws (3M3 × 8).
Position the a hole for screwing on the ceiling
bracket (A) to the front of the camera as illustrated,
align the screw holes on the ceiling bracket with
those on the bottom of the camera, then attach the
bracket to the camera.
3M3 × 8 (supplied)
a hole
Front of
camera
Caution
For attaching the camera to the ceiling bracket,
use only the supplied screws. Using other screws
may damage the camera.
4
Attach the attachment materials (not supplied) to
the ceiling bracket (B), and install the bracket on
the ceiling.
Align the f hole on the ceiling bracket (B) in the
direction where the front of the camera will be
positioned later.
Attachment materials
Ceiling bracket (B)
Ceiling
bracket (A)
Ceiling
f hole
57
GB
Installation