Activating The Setup Mode - Fujitsu M4097D Operator's Manual

Activating the Setup Mode

This section describes how to activate the setup mode.
1 Turn the power ON. Then the scanner
displays "Scanner Ready" on the LCD.
2 If the scanner does not have a video
interface option, go to the procedure
step 3. Press then the scanner with
the video interface option displays
Screen M2.
3 Press then the scanner displays
Screen M3.
4 Press then the scanner displays
Screen M4.
5 Press . Now the scanner is at
Screen 41 (page 6-3) in Setup mode.
NOTICE
Any time you press , you can return to the "Scanner Ready" screen.
<Screen M1>
<Screen M2>
<Screen M3>
<Screen M4>
7-1