Activating The Setup Mode - Fujitsu C150-E146-02EN Operator's Manual

Activating the Setup Mode

This section describes how to activate the setup mode.
1 Turn the power ON. Then the scanner
displays "Scanner Ready" on LCD.
2 If the scanner dose not have video
interface option, go to the procedure 3.
Press then the scanner with the
video interface option displays the
Screen M2.
3 Press then the scanner displays
the Screen M3.
4 Press then the scanner displays
the Screen M4.
5 Press . Now the scanner is at the
Screen 41 (page 6-3) in Setup mode.
NOTE
Any time you press , you can return to "Scanner Ready" screen.
<Screen M1>
<Screen M2>
<Screen M3>
<Screen M4>
7-1