Fujitsu M4097D Operator's Manual page 52

CAUTION
As there is always a possibility that a document may be damaged when using the ADF,
important original documents should never be fed through the ADF. Instead, read them manually
in flatbed mode.
NOTICES
1. When scanning a translucent document, set the density to light mode.
2. Carbonless papers have a chemical composition that damages the Pad and Pick roller. Therefore,
note the following:
Cleaning:
Replacement of parts:
3. The leading edge of all documents fed using the ADF should be straightened so the curl of the
paper meets the specifications shown below:
More than
30 mm
Less than
3 mm
Top of the paper
If misspicks occur frequently, clean the Pad and Pick roller in
accordance with the "Cleaning and Maintenance" manual.
The life of the Pad and Pick roller may be shorter than if PPC paper
documents are fed.
Feed direction
Read surface
More than
30 mm
Less than
5 mm
Top of the paper
Feed direction
Read surface
4-3