Fujitsu M4097D Operator's Manual page 84

Image scanner

Hide thumbs Also See for M4097D:

Table of Contents

14.Select Interface

1 Press "Next"

the scanner display Screen 54.

NOTICE

The screen 54 will appear oniy when the scanner has proper interface boards or option boards in the

third party slot.

2 At Screen 54, press

interface type. Press

change the setting.

NOTICES

1. Normally, this setting does not have to be changed.

2. When an appropriate board is installed in the third party slot of the scanner, the scanner

automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54

can be used to forcibly change the selected interface. The selected interface is then forcibly

changed.

3. The SCSI interface and the board installed in the third party slot cannot be used at the same time.

4. The default is Auto.

3 Press

to return.

7-12

or "Previous"

and let

to select the

if you want to

Table of Contents