Activating The Setup Or Browse Mode - Fujitsu M4099D Operator's Manual

Activating the Setup or Browse Mode

To activate the setup mode, follow these steps:
1. While the LCD is indicating "Ready", press
The <<MODE SELECT>> screen appears with
"SETUP" blinking.
2. Press
ENTER
The <<SETUP MODE>> initial screen (*) appears.
3. Press
ENTER
The <<SETUP MODE>> menu screen (**) appears.
To activate the browse mode, press
steps 2 and 3. The <<BROWSE MODE>> screen appears.
To quit the setup mode, press
Button functions in setup or browse mode
Button name Function
MENU
Returns to the <<SETUP MODE>> menu screen without saving the change (*).
ENTER
Returns to the previous screen while saving the change (*).
CANCEL
Returns to the previous screen without saving the change (*).
• Displays the next function at the right in the menu.
• Moves to the right item.
• Displays the next test function at the left in the menu.
• Moves to the left item.
Changes parameters.
Changes parameters.
* In browse mode, "saving the change" does not occur.
6-2
.
.
before step 2 to make "BROWSE" blinking, then follows
.
CANCEL
.
MENU
<<MODE SELECT>>
SETUP
* <<SETUP MODE>> Initial screen
<<SETUP MODE>>
** <<SETUP MODE>> menu screen
<<SETUP MODE>>
Ready
BROWSE
XXXXX