Fujitsu fi-4340C Operator's Manual page 94

13. Select Front Document Type by pressing
Parameter
L. (Line) White level following is ON. Top 3mm part of the document must be left blank
(grounding color is drop-out color). Use this specification for reading line arts or texts.
P. (Photo) White level following is Off.
Use this specification for reading photographs.
Press to confirm. The scanner displays Screen 11.
Screen 11
14. Select Back Document Type (when "Duplex" was specified) by pressing
are the same as in step 13. Press
Screen 12(Examjple)
15. Confirm what you have specified.
If some parameter needs to change, press
re-select the parameter by pressing
If all parameters are acceptable, press
G 9-8
or .
Description
to confirm. The scanner displays Screen 12.
or to select the corresponding screen and
or and finally press
to return to the "Scanner Ready" screen.
or . The parameters
.