Fujitsu fi-4340C Operator's Manual page 33

Image scanner

Hide thumbs Also See for fi-4340C:

Table of Contents

NOTICE

The SCSI terminator switch is set to ON before shipment from the factory. When the image scanner is

located in the middle of a SCSI daisy chain, change the terminator setting to OFF.

When the image scanner is located at the end the daisy chain, set the terminator to ON.

Mounting the Stacker

1. Press in the bottom of the pins on both sides of the stacker with

your fingertips, and insert the stacker pins until they slot into the

holes on the image scanner.

Connecting the power cable

1. Connect the power cable to the power inlet of the device and a power outlet.

G 2-5

Table of Contents