Fujitsu fi-4340C Operator's Manual page 79
Image scanner
Hide thumbs
Also See for fi-4340C:
- Operator's manual (114 pages) ,
- Cleaning and maintenance (81 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
2. At Screen 32, press
Screen 33
3. At Screen 33, select "Yes" to return the settings to the factory default or select "No" to make new
settings (as shown below). Then press
Screen 34
4. At Screen 34, press
to activate the setting. The scanner displays Screen 35.
Screen 35
5. At Screen 35, press
the bottom edge of the image. With (–:Down), the area is set downward from the bottom edge of the
image. The value changes in 1 mm units. Then press
displays Screen 36.
Screen 36
6. At Screen 36, press
to activate the setting. The scanner displays Screen 37.
Screen 37
7. At Screen 37, press
to activate the setting. The scanner displays the next setup item.
or
to select "Yes" and press
. The scanner displays Screen 34.
or
to change the top setting. The value changes in 1 mm units. Then press
or
to change the bottom setting. With (+:Up), the area is set upward from
or
to change the left setting. The value changes in 1 mm units. Then press
or
to change the top setting. The value changes in 1 mm units. Then press
. Then the scanner displays Screen 33.
to activate the setting. The scanner
G 7-15
Advertisement
Table of Contents
