-
Paper larger than letter size in width (216 mm) or legal size in length (356 mm)
-
Materials other than paper (for example, clothes, metal foil, or OHP film).
-
Light-sensitive paper.
-
Paper which has perforations and drilling in an end.
-
Non-rectangular paper.
-
Very thin paper.
• Set documents on the ADF so that the curl of the leading edge does not exceed the measures shown
below.
• To avoid skewing, do not feed documents of different widths during the same batch.
!
Adjust the stacker extension to the paper
size.
G 4-7