Fujitsu fi-4340C Operator's Manual page 52
Image scanner
Hide thumbs
Also See for fi-4340C:
- Operator's manual (114 pages) ,
- Cleaning and maintenance (81 pages) ,
- Brochure (2 pages)
Table of Contents
Advertisement
• Paper larger than letter size in width (216 mm) or legal size in length (356 mm)
• Materials other than paper (for example, clothes, metal foil, or OHP film).
• Light-sensitive paper.
• Paper which has perforations and drilling in an end.
• Non-rectangular paper.
• Very thin paper.
NOTICE
• When scanning a translucent document, set the density to light mode.
• Carbonless papers have a chemical composition that damages the Pad and the rollers which send a
paper (Pick roller etc). Therefore, note the following:
Cleaning
Replacement of parts :The life of the Pad and Pick roller may be shorter than if PPC paper
• The leading edge of all documents fed using the ADF should be straightened so the curl of the paper
meets the specifications shown below:
• To prevent roller smudging, avoid scanning a document filled out in a pencil.
Clean the roller as ofen as possible when scanning many document.
G 5-4
: If mispicks occur frequently, clean the Pad and Pick roller in accordance with
the "Cleaning and Maintenance" manual.
documents are fed.
Advertisement
Table of Contents
