Fujitsu fi-4340C Operator's Manual page 24

No . Part
1 Document cover
2 Document bed
3 Document holding pad
4 Automatic document feeder
(ADF)
5 Stacker
6 Operator panel
7 Transport Lever
8 ADF paper chute
9 ADF lever
10 Power switch
11 Power inlet
12 EXT connector
13 SCSI terminator switch
14 SCSI-ID switch
15 Interface connectors
16 Third party slot
17 Spare Pad ASSY
G 1-4
Closes over and keeps in place the document to be read.
Holds document to be read. Also called Flatbed (FB).
Presses document to the Document bed.
Automatically feeds documents to the reading position.
Stacks the read documents.
Contains indicator panel that indicates scanner status.
Transport lever Secures the carrier unit. Set to locked position
when moving scanner.
Holds the documents to be fed by the automatic document
feeder (ADF).
Opens/closes the ADF to enable the removal of documents
jammed in the feeder.
Turns the power On or Off.
Connects to an AC power outlet with the power cable.
Connects to an optional imprinter.
Set to ON when the image scanner is the final device on the
SCSI daisy chain. Otherwise, set to OFF.
Sets the SCSI ID. (Default ID is 5.)
Connect to the host system with interface cables.
A Fujitsu VIDEO INTERFACE BOARD or
fi-CMP3(JPEG COMPRESSION BOARD) is installed.
Spare pad assembly. (One spare pad assembly is provided as
the default setting.)
Function