Fujitsu fi-4340C Operator's Manual page 81

7. At Screen 43, press
to activate the setting. The scanner displays the next setup item.
17 Color to be Read in Unicolor Reading
1. Press "Next" or "Previous"
Screen 44
2. At Screen 44, press
NOTICES
1.The specification from the host computer has priority.
2.The default is G (Green).
3. Press to return.
18 Setting the Grayscale Mode
1. Press "Next" or "Previous"
Screen 45
2. In Screen 45, press
"Normal" refers to the regular mode. When "Normal" is selected, scanning is performed at the
machine defaults for image quality and speed.
"Fast" refers to the speed priority mode. When "Fast" is selected, scanning is performed at a speed
faster than that of the normal mode.
"Fine" refers to the quality priority mode. When "Fine" is selected, scanning is performed at a quality
higher than that of the normal mode.
The lower display of Screen 45 is switched as follows:
1."Normal/Fast" is displayed, and "Normal" flashes.
2."Fast/Fine" is displayed, and " Fast" flashes.
3."Fast/Fine" is displayed, and "Fine" flashes.
or to change the top setting. The value changes in 1 mm units. Then press
and let the scanner display Screen 44.
or to select a light source. Press
to display Screen 45 on the LCD.
or to select "Normal", "Fast" or "Fine".
if you want to activate the setting.
G 7-17