Fujitsu fi-4340C Operator's Manual page 68

No Item
14
IPC mode
15
ADF Edge Erasing
16
FB Edge Erasing
17 Select read color
18
Gray mode
19
Remaining ink
20 Print No.
*1) Some restrictions apply to the detection of a double feed.
*2) This offset refers to the difference from the value adjusted by automatic offset adjustment.
G 7-4
Description
When the IPC-4D image processing board
is installed in the third party Slot, select
this IPC-4D board or the image processing
circuit built in the scanner.
Adjusts the edge areas to be erased from
the image scanned by the automatic
document feeder (ADF).
Adjusts the edge areas to be erased from
the image scanned by the flat bed (FB).
Selects the color to be read in unicolor
reading.
Switches between quality priority scanning
and speed priority scanning with respect
to the default setting when scanning
grayscale images.
Displays the remaining amount of ink
when the Imprinter option is attached and
resets the remaining ink counter when
replacing the ink.
Selects printing of Nos. when the Imprinter
option is attached.
(Continued)
Selectable
Default
parameters
Standard/IPC4D Standard
Left/Right: Left/Right:
0 to 15 mm 0 mm
Top: Top:
0 to 15 mm 0 mm
Bottom: Bottom:
-7 to +7 mm 0 mm
Left/Right: Left/Right:
0 to 15 mm 0 mm
Top: Top:
0 to 15 mm 0 mm
Bottom: Bottom:
0 to 15 mm 0 mm
R/G/B/W G
Normal/
Draft/ Normal
Quality
Reset/No No
on/off off