Status Transition Of Logical Unit - Fujitsu M3097G Oem Manual

4.8

Status Transition of Logical Unit

BUS DEVICE RESET message
UNIT ATTENTION status
INQUIRY command
Range protected in reserved status
NOT READY status
Time to READY
At room temperature
(25∞C) : e60 seconds
At low temperature
(5∞C) : e 5 minutes
Normal status
C. A. status
REQUEST SENSE command
(Error detail reported/cleared)
Power ON
Reset
REQUEST SENSE command
UNIT ATTENTION reported/cleared)
NOT READY status
REQUEST SENSE
Command
(NOT READY reported)
READY status: Waiting
READ command
Reading
Scan completed
$ Hardware error
$ Abnormal command
$ Abnormal parameter
$ Medium error
C. A status
GOOD status
CHECK CONDITION status
Status transition
Other command
Other command
Other command
Other command
(C. A. status released)
4 $ 105