Multiple Read (With Cmp Ii Option: Disconnect Enabled) - Fujitsu M3097G Oem Manual

4.7.3.5

Multiple READ (with CMP II option: disconnect enabled)

Request image data (TL).
or
Command completion
Next data request
READ command
Disconnect
Reconnect
Image data
(64KB ¥ N)
Saved data pointer
Disconnect
Reconnect
Image data (TL>M)
GOOD status
CHECK CONDITION
status
See Notes 1 and 2.
(M=0 before scanning)
Start scanning.
Data volume
< Min(TL>M or 64 KB)
(
Wait for following
condition is satisfied.)
TL>M > Data volume
f 64 KB
(only for disconnected case)
Send image data.
M = M + 64 KB ¥ N
(Wait for following
condition is satisfied)
Data volume
f Min(TL>M or 64 KB)
Data volume f TL>M
(only for disconnected case)
Send image data
Completion
Uncompleted
reading (one page)
Completed
reading (one page)
or
or
or
4 $ 103