D.2.3 Notes On Compatibility; D.2.3.1 Resolution - Fujitsu M3097G Oem Manual

- Byte2E: Variance rate for simplified DTC.
Value (Hex)
00
01 to 1F
20 to 3F
40 to 5F
60 to 7F
80 to 9F
A0 to BF
C0 to DF
E0 to FF
D.2.3 Notes on compatibility
D.2.3.1 Resolution
- M3096G:
- M3097G:
- Note:
If the specified value in the installation of the M3096G cannot be divided by 4,
the value must be specified as a number that can be divided by 4 when
installing the M3097G scanner.
- Supplement
When neither the IPC nor IPC II option is installed in the M3096G or M3097G
scanner, only 200 dpi, 240 dpi, 300 dpi, or 400 dpi can be specified.
D $ 12
Default
Variance rate is small
Variance rate is
Variance rate is
Variance rate is
Variance rate is normal
Variance rate is
Variance rate is
Variance rate is large
With installation of the IPC option, resolution is specifiable as a
number from 100 dpi to 1600 dpi in units of 4 dpi. If the specified
value cannot be divided by 4, the fractional part (remainder) is
ignored.
Example: If the specified value is ™203 dpi∫, processing is executed
at 200 dpi for the M3096G scanner.
With installation of the IPC II option, resolution is specifiable as a
number from 50 dpi to 1600 dpi in units of one dpi.
Meaning