Status Transition Of Logical Unit - Fujitsu SCANPARTNER 600C User Manual
Fujitsu scanner user manual
Hide thumbs
Also See for SCANPARTNER 600C:
- User manual (25 pages) ,
- Consumable replacement and cleaning instructions (7 pages) ,
- Installation procedures (5 pages)
Table of Contents
Advertisement
4.8 Status Transition of Logical Unit
INQUIRY command
Range protected in reserved status
NOT READY status
Time to READY
At room temperature
(25§C):
30 seconds
At low temperature
(5§C):
3 minutes
Normal status
C.A. status
REQUEST SENSE command
(Error detail reported/cleared)
Power ON
Reset
BUS DEVICE RESET message
UNIT ATTENTION status
REQUEST SENSE command
UNIT ATTENTION reported/cleared
NOT READY status
READY status: Waiting
READ command
Reading under way
Scan completed
C.A status
REQUEST SENSE
COMMAND
(NOT READY reported)
- Hardware error
- Abnormal command
- Abnormal parameter
- Medium error
Other command
(C.A. status released)
4-59
GOOD status
CHECK CONDITION status
Status transition
Other command
Other command
Other command
Advertisement
Table of Contents
