Fujitsu M3097G Oem Manual page 72

(p) Vender unique parameter (byte 28 and after)
Specifies, in byte 28 and after, a vender unique parameter, including items
such as subwindow list, outline, emphasis, automatic separation, mirroring,
and paper size, as required. This parameter is specified in the following
format. This parameter does not need data until byte 3F. (It is unnecessary
to transfer the unnecessary parameter, but the intermediate parameter
cannot be omitted.)
7 6
28
29
2A
2B
2C
2D
2E
2F
30
31
32
33
(MSB)
34
35
36 (MSB)
39
3A (MSB)
3D
3E
3F
• Vender unique identification code: byte 28
Specifies a vender unique identification code. For this scanner, X'00'
must be specified. If other value is specified, this scanner returns the
following error information:
• Status:
• Sense key: X'5' (ILLEGAL REQUEST)
5 4 3
Vender unique identification code
pattern
Outline extraction
Image emphasis
Automatic separation
Mirror image
Variance rate
DTC mode
Not supported
White level follower mode
Subwindow list
Paper size
Paper width X
Paper length Y
DTC selection
Reserved
B'00001' (CHECK CONDITION)
2 1 0
(LSB)
(LSB)
(LSB)
4 – 47