Installing And Setting Driver - Fujitsu fi-5000N Operator's Manual

Chapter 4

Installing and Setting Driver

In order to scan documents from the scanner connected to fi-5000N, it is necessary to install the
scanner driver and the application software onto the PC.
There are two types of scanner drivers and applications:
Scanner Driver:
FUJITSU TWAIN 32
Scanner Driver
FUJITSU ISIS Scanner Driver
Install the appropriate scanner driver for the application you will use.
If necessary, install one of the applications mentioned above.
ATTENTION
4.1 Installing FUJITSU TWAIN 32 Scanner Driver ............................................... 28
4.2 Installing ScandAll 21 ...................................................................................... 31
4.3 Installing FUJITSU ISIS Scanner Driver ......................................................... 33
4.4 Configuring Scanning Application ................................................................. 36
4.5 Uninstalling the Scanner Driver and Scanning Application......................... 39
Application:
ScandAll 21 (For FUJITSU TWAIN 32)
QuickScan Pro
•
Although the scanner is bundled with its own scanner driver, to
connect the scanner to this product, you must use the scanner driver
bundled with this product.
•
™
QuickScan Pro is not bundled with this product. Use the software bun-
dled with the scanner.
Refer to the "Getting Started" provided with the scanner for installation
details.
•
If you use ScandAll21, install the one included in the Setup CD-ROM
provided with this product. Changes to support fi-5000N is included with
this version.
™
(For FUJITSU ISIS)
fi-5000N Operator's Guide
4
27