Table of Contents
Advertisement
■ [Launch Option] Tab
The scanning application to be started when the button on the scanner ([Scan] or [Send To]) is
pressed, can be configured from this screen.
Name of Item
Button:
Target:
Argument:
Start In:
46
Selects the button to be configured from among "Scan", and
"Send To 1 - Send To 9". You must set the following "Target",
"Argument" and "Start In", otherwise no application will start up.
Specifies the file name of the application to be started.
Configures the argument to be passed to the specified applica-
tion that is started.
With this function, you can also add more actions than just start
the scanning application when scanner button is pressed.
The argument that can be specified differs depending on the
application being used.
(Refer to "5.7 Settings of [Launch Options]" (page 64) for
details.)
Specifies the default folder when the application starts.
Function
Advertisement
Table of Contents
Troubleshooting
