Table of Contents
Advertisement
4.1
Installing FUJITSU TWAIN 32 Scanner Driver
■ Preparation
Before starting the installation, check the following contents.
• Prepare the Setup CD-ROM.
• Uninstall any older versions of FUJITSU TWAIN 32 driver if already installed.
ATTENTION
■ Installing
HINT
1. Turn on the power of the PC, and log on to Windows.
ATTENTION
2. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
ATTENTION
28
•
Although the scanner is bundled with its own scanner driver, to
connect the scanner to this product, you must use the scanner driver
bundled with this product.
•
To uninstall previous versions, uninstall [Scanner Utility for Microsoft
Windows] from [Add/Remove Programs] of the Control Panel.
•
We recommend you to check our website for the latest version of this
driver.
Our site is:
http://www.fujitsu.com/global/support/computing/peripheral/scanners
Windows XP screenshots are used in this section as examples.
The windows and operations may slightly vary depending on your OS.
When using Windows 2000 or Windows XP, log on as a user with
"Administrator" rights.
This screen may not appear when the "Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this CD-ROM directly from the "Explorer" or
"My Computer".
Advertisement
Table of Contents
Troubleshooting
