Fujitsu fi-5000N Operator's Manual page 59

Name of Item
[OK] button
[Refresh] button
[Favorite] button
[Add] button
[Delete] button
[User Config.] button
[Admin.] button
[Scanner Info.] button
Closes the screen and exits the fi-5000N Configuration Tool.
Updates and displays the latest information of the List View.
Selects a scanner to use among the scanners connected to the
network.
With the device name selected, when you click this button, a "*"
is displayed in the "Favorite" column, and it is configured as the
default scanner.
When using multiple scanners, this button helps you to switch
easily to other scanners.
Adds a new fi-5000N to the List View.
There is no need to add because the fi-5000N in the same
subnet as the PC is displayed automatically in the list.
To add an fi-5000N which is in other subnet, use this button.
Deletes the selected fi-5000N from the list.
(An fi-5000N cannot be deleted if it is in the same subnet as your
PC.)
Registers/changes/deletes user information of the selected fi-
5000N.
Can be used only by the Operating Administrator.
The Administrator PIN is necessary.
Changes the name of the selected fi-5000N, network settings,
and Administrator PIN. Also, user information can be backed up
and restored.
Can be used only by the Administrator.
The Administrator PIN is necessary.
Displays the information of the scanner that is connected to fi-
5000N. (It can be used by both, Administrator and users)
Consumables counters resetting, offset settings and power
saving settings can also be done. (Only by the Administrator)
fi-5000N Operator's Guide
5.2 fi-5000N Software Overview
Function
5
45