Fujitsu fi-5000N Operator's Manual page 61

■ [Advance] Tab
When receiving image data, the trigger port number for the fi-5000N, may conflict with other
applications.
This setting is used to change the trigger port number on the PC.
Name of Item
Trigger port (PC):
[Default] button:
ATTENTION
■ [Version] Tab
This tab shows the version information of the fi-5000N Configuration Tool.
Used to specify a trigger port number on the PC.
Resets to the default number.
When changing the trigger port number on the PC, you must also change
the trigger port on the fi-5000N. Refer to "5.5 fi-5000N Administrator Set-
tings" (page 56). If the both port numbers are not the same, the fi-5000N
will not work correctly.
5.2 fi-5000N Software Overview
Function
fi-5000N Operator's Guide
5
47