Installing The Driver - Fujitsu ScanZen Eco Series Installation Manual

4. Installing the Driver

Follow the steps below to install the driver for ScanZen onto your computer.
1 If you have an administrator on a shared network, be sure you log into Windows® as a
user with administrator privileges.
2 Download the following file onto your hard drive.
3
Quit any other applications that are running on your computer.
4 Run the file that you downloaded in step 2. This creates a folder named "Disk1" in
the same folder where the program is stored. Installation starts automatically after
self-extraction. If it doesn't start, double-click "Setup.exe" which is located in the Disk1 folder.
5 Follow the instructions from the Installation Wizard to complete the installation.
PaperStream IP (TWAIN) for ScanZen 1.54.0.xxxx
PSIPTWAIN-SZ-1_54_0c.exe (xx,xxx,xxx Bytes)
6