Option Problems - Dell 3000cn Color Laser Printer User Manual

Printing on both ends of the
transparencies is faded.

Option Problems

If an option does not operate correctly following installation or stops working:
Turn off the printer, wait for 10 seconds, and then turn on the printer. If this does not fix the problem, unplug the
printer, and check the connection between the option and the printer.
Print the Printer Settings page to see if the option is listed in the Installed Options list. If the option is not listed,
reinstall it. See "Printing a Printer Settings
Make sure the option is selected in the printer driver you are using.
The following table lists printer options and corrective actions for related problems. If the suggested corrective action does not
correct the problem, call customer service.
Action
Problem
Optional tray · Make sure a secure connection exists between trays (250-sheet tray module or 500-sheet tray module).
· Make sure the print media is loaded correctly. See
information.
· If the duplex module is listed on the Printer Settings page, and the print media jams when it enters or exits
Optional
the duplex module, the printer and duplex module may not be properly aligned.
duplex
· If the duplex module is not available, verify the duplex module cable is connected to the printer and that
module
· This occurs when the printer is operating in a location where relative humidity reaches
85% or more. Adjust the humidity or relocate the printer to an appropriate environment.
Page."
"Loading Print Media in Optional Trays" for more