Windows Xp/Server 2003 - Dell 3000cn Color Laser Printer User Manual

9. Replace all trays and load the paper.
10. Turn on the printer.
NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type.
11. Print a Printer Settings page to verify the optional 250-sheet tray module or 500-sheet tray module is installed
correctly.
a. Press Menu.
b. Press until Configure appears, and then press
c. Press until Reports appears, and then press
d. Printer Settings is displayed. Press
The Printer Settings page is printed.
e. Verify 250-Sheet Tray Module or 500-Sheet Tray Module is listed in the printer settings under Printer
Options.
If the tray modules are not listed, turn off the printer, unplug the power cable, and reinstall the optional 250-
sheet tray module or 500-sheet tray module.
12. After loading paper in the optional tray, specify the paper type and size from the printer operator panel.
a. Press until the paper size for the installed tray appears, and then press
b. Press until the paper type for the installed tray appears, and then press
13. Update your driver by following the instructions for each operating system. If the printer is on a network, update the
driver for each client.

Windows XP/Server 2003

1. Click Start ® Printers and Faxes.
2. Right-click this printer icon and select Properties.
3. Click the Options tab, and then select Get Information from Printer.
or .
or .
.
.
.