Dell 3000cn Color Laser Printer User Manual page 88

Use the Network menu to change printer settings affecting jobs sent to the printer through a network port.
Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet.
The change becomes effective after the printer is turned off and then on again.
Values:
Detects the Ethernet settings automatically.
Auto*
Uses 10base-T half-duplex.
10Base Half
Uses 10base-T full-duplex.
10Base Full
Uses 100base-TX half-duplex.
100Base Half
Uses 100base-TX full-duplex.
100Base Full
TCP/IP
Purpose:
To specify the TCP/IP settings.
The change becomes effective after the printer is turned off and then on again.
Values:
IP AddressSetup AutoIP*
BOOTP
RARP
DHCP
Panel
IP Address
Subnet Mask
Automatically sets the IP address.
Uses BOOTP to set the IP address.
Uses RARP to set the IP address.
Uses DHCP to set the IP address.
Enables the IP address entered on the operator panel.
Displays the IP address allocated to the printer by using the keys on the operator panel.
Displays the subnet mask.
Displays the gateway address.