Dell 3000cn Color Laser Printer User Manual page 149

1. Start Here
2. On the printer press MENU.
3. Press to get to Tray Settings.
4. Press to select Tray Settings.
5. Press to get to Paper Size.
6. Press to select Paper Size.
7. Press to get to MPF.
8. Press to select MPF.
9. Using and , select the appropriate paper size (Letter).
10. Press the middle button, SELECT, once Letter is displayed on the lower line, this puts a * by it.
11. Now we have the MPF Size set to Letter.
12. Now press MENU to get back to Tray Settings/Paper Size.
13. Press to get to Paper Type.
14. Press to select Paper Type.
15. Press to get to MPF.
16. Press to select MPF.
17. Using and , select the appropriate paper type (Plain 1).
18. Press SELECT, once Plain 1 is displayed on the lower line.
19. Now we have the MPF Type set to Plain 1.
20. Now press MENU to get back to Ready to Print
21. Now insert the Letter-sized stack of paper into the MPF.
22. On the screen MPF/Letter will appear.
23. Press SELECT to confirm this.
24. Now on the screen MPF/Plain 1 will appear.
25. Press SELECT to confirm this.
26. We now have all the hardware settings on the printer correct
Now, all software settings screen shots are from WORD, this was done in Word. However if in any application, you go File ®
Print and then click the Properties button, you will get this same driver properties window.
27. Open up Word and create a new document.
28. Go to File ® Print.
29. Select the Dell Color Laser Printer from the printers list
30. Click the Properties button to the right.
31. This brings up Driver Properties.