42
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor heat-sink fan with the screw holes on the
computer base.
2
Tighten the captive screws that secure the processor heat-sink fan to the computer
base.
3
Connect the processor heat-sink fan cable to the connector on the system board.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 15.
2
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3
Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Processor
Heat-Sink Fan
Before working inside your computer, read the safety
Replacing the Processor Heat-Sink Fan
77
|