4
Turn the computer over.
5
Remove the screws that secure the palm-rest assembly to the computer base.
6
Carefully pry out the palm-rest assembly from the two tabs along the rear edge of the
computer, and then ease the palm-rest assembly from the computer base.
CAUTION:
to avoid damage to the palmrest.
7
Lift the palm-rest assembly off the computer base.
8
Remove the status-light board. See "Removing the Status-Light Board" on page 54.
1
screws (3)
52
|
Removing the Palm Rest
Carefully separate the palmrest from the computer base
1
2
palm-rest assembly
2