Replacing The Processor Heat-Sink Fan; Procedure; Postrequsites - Alienware M17x R4 Owner's Manual

16
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Align the screw holes on the processor heat-sink fan with the screw holes on the
chassis.
2 Tighten the captive screws that secure the processor heat-sink fan to the chassis.
3 Connect the processor heat-sink fan cable to the connector on the system board.

Postrequsites

1 Replace the compartment door. See "Replacing the Compartment Door" on page 15.
2 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Processor
Heat-Sink Fan
Before working inside your computer, read the safety

Replacing the Processor Heat-Sink Fan

31
|