20
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Slide the macro-keyboard cable and macro-keyboard backlight cable into the
respective connectors on the system board, and press down on the connector
latches to secure the cables.
2
Slide the tab on the macro keyboard into the slot on the palm-rest assembly and
lower the macro keyboard into place.
3
Replace the screw that secures the macro keyboard to the computer base.
Postrequisites
1
Replace the keyboard. See "Replacing the Keyboard" on page 35.
2
Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
3
Replace the base cover. See "Replacing the Base Cover" on page 15.
4
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
5
Follow the instructions in "After Working Inside Your Computer" on page 11.
38
|
Replacing the Macro Keyboard
Replacing the Macro Keyboard
Before working inside your computer, read the safety