Procedure; Postrequisites - Alienware M18x R2 Owner's Manual

10
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Place the coin-cell battery into the slot and press gently to adhere it to the computer
base.
2 Route the coin-cell battery cable through the routing guides on the computer base.
3 Connect the coin-cell battery cable to the connector on the system board.

Postrequisites

1 Replace the base cover. See "Replacing the Base Cover" on page 15.
2 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
20
| Replacing the Coin-Cell Battery
Replacing the Coin-Cell
Battery
Before working inside your computer, read the safety