Replacing the Processor Heat-Sink Fan
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the processor heat-sink fan with the screw holes on the
computer base.
2
Tighten the captive screws that secure the processor heat-sink fan to the computer
base.
3
Connect the processor heat-sink fan cable to its connector on the system board.
Postrequisites
1
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
2
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
3
Replace the base cover. See "Replacing the Base Cover" on page 15.
4
Follow the instructions in "After Working Inside Your Computer" on page 13.
Before working inside your computer, read the safety
UPMIDIAS
Replacing the Processor Heat-Sink Fan
35
|