Replacing The Power-Button Board; Procedure; Postrequisites - Alienware M18x R2 Owner's Manual

16
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.

Procedure

1 Align the screws holes on the power-button board with the screw holes on the palm-
rest assembly.
2 Replace the screws that secure the power-button board to the palm-rest assembly.
3 Connect the power-button board cable to the system-board connector.

Postrequisites

1 Replace the center control cover. See "Replacing the Center Control Cover" on
page 29.
2 Replace the base cover. See "Replacing the Base Cover" on page 15.
3 Replace the battery pack. See "Replacing the Battery Pack" on page 13.
4 Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Power-Button
Board
Before working inside your computer, read the safety

Replacing the Power-Button Board

31
|