Removing The Status-Light Board; Prerequisites; Procedure - Alienware M18x R2 Owner's Manual

27
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove the battery pack. See "Removing the Battery Pack" on page 12.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
3 Remove the center control cover. See "Removing the Center Control Cover" on page 26.
4 Remove the keyboard. See "Removing the Keyboard" on page 32.
5 Remove the macro keyboard. See "Removing the Macro Keyboard" on page 36.
6 Remove the display assembly. See "Removing the Display Assembly" on page 43.
7 Follow the instructions from step 1 to step 7 in Removing the Palm Rest.

Procedure

1 Note the routing of status-light board cable and remove the cable from the routing
guides.
1
1 status-light board cable routing
54
|

Removing the Status-Light Board

Removing the Status-Light
Board
Before working inside your computer, read the safety
2
2 status-light board