Setting The Communication Report - Oki CX4545 MFP Management Manual

2.SETTING ITEMS (ADMIN)

Setting the communication report

1
Press [COMM. REPORT].
The COMM. REPORT screen is displayed.
2
Specify the conditions for each transmission type and press
[OFF] — Press this button to disable printing the communication report.
[ALWAYS] — Press this button to print a communication report for every transmission.
[ON ERROR] — Press this button to print a communication report only when an error occurs.
The DIRECT TX and POLLING settings are available only when the FAX Unit (optional) is installed.
When you press [ALWAYS] or [ON ERROR] for MEMORY TX or MULTI TX, the "Print 1st page image?" message
is displayed. Press [YES] to print the communication report with the first page image, or press [NO] to print the
communication report without the page image.
2 SETTING ITEMS (ADMIN)
.
Setting List/Report 183